Payment & Shipping Terms:
|Application:||Fiber Optic Connector Test||Wavelength:||650±10nm|
|Maximum Output Light Power:||10 Mw||Number Of Channels:||4|
fiber optic polishing machine,
fiber optic curing oven
Desk Top Fiber Optic Equipment Fiber Fault Detector For Patch Cord Testing
Table four channel red light source using 650nm laser as the light emitting device, the output power can reach 10mW; at the same time support four path fault detection..This product has the advantages of simple operation, can be used to do a visual test of optical fiber, optical cable, connector, when the measured fiber has a breakpoint, laser propagating along the fiber will leak at the breakpoint, which can determine the fiber breakpoint location.This method can be used in both single mode and multimode optical fibers. This series of products can be used for active devices and passive device test, single channel and multi-channel optical testing at the same time, especially for the multiplexed testing required for the mass production of optical devices.
l Constant power output, stable performance, long life
l High output light power
l Single or multichannel simultaneous detection can be realized; four channels are supported at the same time
l Easy recognition of optical fiber breakpoints and bending
l The realization of the detection of the mechanical continuity point
l Adopt an AC adapter
|Number of channels||4|
|Maximum output light power||10 mw|
|Power waste||5 W|
|working temperature||-10°～ +45°|
|Storage temperature||-40°～ 70°|
Matters needing attention:
l Please carry out the safe operation according to the instructions of the equipment.
l Please check whether the ground wire and fire line and the zero line are installed correctly before the equipment is electrified.
l Please be careful to keep the head clean, so as not to reduce the output light power.
Contact Person: Doris