Payment & Shipping Terms:
|Application:||Fiber Optic Cable Cutting||Cable Size:||2.0mm-6.0mm|
|Cut The Cable Length:||1-450m||Appropriate Weight:||42kg|
|Air Supply:||0.4 ~ 0.6 MP / CM||Power:||450w|
fiber optic curing oven,
patch cord manufacturing machine
1. High length accuracy: meter wheel to count length, no length deviation from cable twist, slip during feeding
2. Stable performance: robust mechanical structre intellectual controller for super reliable movement
3. Efficient cut: patented design for super reliable and complete trim of super fine fiber
4. Correction function: convenient for the length of the staff college checked
5. Protecting fiber: maximum reduce the work process of stress on the optic cable
6. Easy operation: two separated instruments for length and quantity setup
7. Intellectual control: intellectual software to control and monitor operation
Routine maintenance is an important task for using the device in order to avoid failure,
the equipment in good working condition, the user should be checked daily to cultivate
1. Check the air pressure is normal for the 0.4 ~ 0.6MP/CM.
2. Check the voltage is normal for the 220VAC/50HZ.
3. Check whether it is normal for the flexible cutter.
4. Check whether it is normal for the flexible closing.
5. Check that the motor is normal for the flexibility.
6. Check whether it is normal to put a flexible cable machine.
7. Check the relief valve is normal.
8. Check whether the variable is located normal to flexible.
General technical requirements
1. For cable:2.0 φ ~ φ6.0mm.
2. Cut the cable length from 1 to 450 meters.
3. Appropriate weight less than 42kg
4. Cut cable Accuracy: 100M * 3 ‰
5. To send cable speed 0.1 ~ 1.6M / s
6. Reel adjustment range: φ90 ~ φ120mm
7. Packing size
L * W * H = 63*119*96cm
8. Power supply: 220VAC / 50Hz
9. Air Supply: 0.4 ~ 0.6 MP / CM
10. Power: 450W
11. Temperature: 0 ℃ ~ 60 ℃
A. Environmental temperature range: -10 ℃ ~ 50 ℃
B. Relative Humidity: 15% ~ 85%
C. Vibration: 1.0g 5 ~ 100Hz 45min
Contact Person: Doris